A64 v1 #285
Closed
A64 v1 #285
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Allwinner A83T is octa-core cortex-a7 based SoC. It's clock control unit and prcm, pinmux are different from previous sun8i series. Its processor cores are arragned in two clusters 4 cores each, similar to A80. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
…rivers-for-4.6' and 'sunxi/dt-for-4.6' into sunxi/for-next
The Allwinner sunxi specific interrupt controller cannot be compiled for any architecture except arm: drivers/irqchip/irq-sun4i.c:25:26: fatal error: asm/mach/irq.h: No such file or directory compilation terminated. It turns out that this header is actually not needed for the driver, so remove it and allow compilation for other architectures like arm64. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
The driver for the sunxi-ss crypto engine is not entirely 64-bit safe, compilation on arm64 spits some warnings. The proper fix was deemed to involved [1], so since 64-bit SoCs won't have this IP block we just disable this driver for 64-bit. [1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2016-January/399988.html (and the reply) Signed-off-by: Andre Przywara <andre.przywara@arm.com>
At the moment the "sun6i" RTC drivers depends on having two specific SoC families selected. The Allwinner A64 SoC has the same RTC, so extend the Kconfig option to allow inclusion of the driver for all Allwinner SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
To prepare for the Allwinner A64 SoC support, introduce a config option to allow compiling Allwinner (aka. sunxi) specific drivers for the arm64 architecture as well. This patch just defines the ARCH_SUNXI symbol to allow Allwinner specific drivers to be selected during kernel configuration. Since the MMC driver is quite essential for Linux to be useful, select it by default. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Based on the Allwinner A64 user manual and on the previous sunxi pinctrl drivers this introduces the pin multiplex assignments for the ARMv8 Allwinner A64 SoC. Port A is apparently used for the fixed function DRAM controller, so the ports start at B here (the manual mentions "n from 1 to 7", so not starting at 0). Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Allwinner H3 SoC introduced bus clock gates with potentially different parents per clock gate. The H3 driver chose to hardcode the actual parent clock relation in the code. Add a new driver (which has the potential to drive the H3 and also the simple clock gates as well) which uses the power of DT to describe this relationship in an elegant and flexible way. Using one subnode for every parent clock we get away with a single DT compatible match, which can be used as a fallback value in the actual DTs without the need to add specific compatible strings to the code. This avoids adding a new driver or function for every new SoC. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The only difference between the different compatible matches at the end of clk-sunxi.c are the critical clocks. Two SoCs get away so far without any, so there is no reason to enumerate those SoCs in here explicitly, though we have to keep them in for compatibility reasons. Rename the init function to highlight this generic feature and add a new, generic DT compatible string which can be used as a fallback value in the future should a particular SoC don't need any special treatment. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
clk_register_mux returns a pointer wrapped error value in case of failure, so a simple NULL check is not sufficient to catch errors. Fix that and elaborate on the failure reason on the way. The whole function does not return any error value, so silently failing may leave users scratching their heads because the kernel does not provide any clues on what's wrong. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The only reason we match the different root compatible strings when registering the different sunxi clock types is to provide a list of critical clocks. Tell the mux clock (for a start) to get this property from the device tree, allowing new SoCs to refer to the generic fallback compatible string when the DT provides the critical clock information. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Allwinner A64 SoC is low-cost SoC with 4 ARM Cortex-A53 cores and the typical tablet / TV box peripherals. The Soc is based on the (32-bit) Allwinner H3 chip, sharing most of the peripherals and the memory map. Although the cores are proper 64-bit ones, the whole SoC is actually limited to 4GB (including all the supported DRAM), so we use 32-bit address and size cells. This has the nice feature of us being able to reuse the DT for 32-bit kernels as well. This .dtsi lists the hardware that we support so far. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The Pine64 is a cost-efficient development board based on the Allwinner A64 SoC. There are three models: the basic version with Fast Ethernet and 512 MB of DRAM (Pine64) and two Pine64+ versions, which both feature Gigabit Ethernet and additional connectors for touchscreens and a camera. Or as my son put it: "Those are smaller and these are missing." ;-) The two Pine64+ models just differ in the amount of DRAM (1GB vs. 2GB). Since U-Boot will figure out the right size for us and patches the DT accordingly we just need to provide one DT for the Pine64+. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Nov 30, 2016
The fb_helper->connector_count is modified when a new connector is constructed following a hotplug event (e.g. DP-MST). This causes trouble for drm_setup_crtcs() and friends that assume that fb_helper is constant: [ 1250.872997] BUG: KASAN: slab-out-of-bounds in drm_setup_crtcs+0x320/0xf80 at addr ffff88074cdd2608 [ 1250.873020] Write of size 40 by task kworker/u8:3/480 [ 1250.873039] CPU: 2 PID: 480 Comm: kworker/u8:3 Tainted: G U 4.9.0-rc6+ torvalds#285 [ 1250.873043] Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 [ 1250.873050] Workqueue: events_unbound async_run_entry_fn [ 1250.873056] ffff88070f9d78f0 ffffffff814b72aa ffff88074e40c5c0 ffff88074cdd2608 [ 1250.873067] ffff88070f9d7918 ffffffff8124ff3c ffff88070f9d79b0 ffff88074cdd2600 [ 1250.873079] ffff88074e40c5c0 ffff88070f9d79a0 ffffffff812501e4 0000000000000005 [ 1250.873090] Call Trace: [ 1250.873099] [<ffffffff814b72aa>] dump_stack+0x67/0x9d [ 1250.873106] [<ffffffff8124ff3c>] kasan_object_err+0x1c/0x70 [ 1250.873113] [<ffffffff812501e4>] kasan_report_error+0x204/0x4f0 [ 1250.873120] [<ffffffff81698df0>] ? drm_dev_printk+0x140/0x140 [ 1250.873127] [<ffffffff81250ac3>] kasan_report+0x53/0x60 [ 1250.873134] [<ffffffff81688b40>] ? drm_setup_crtcs+0x320/0xf80 [ 1250.873142] [<ffffffff8124f18e>] check_memory_region+0x13e/0x1a0 [ 1250.873147] [<ffffffff8124f5f3>] memset+0x23/0x40 [ 1250.873154] [<ffffffff81688b40>] drm_setup_crtcs+0x320/0xf80 [ 1250.873161] [<ffffffff810be7c5>] ? wake_up_q+0x45/0x80 [ 1250.873169] [<ffffffff81b0c180>] ? mutex_lock_nested+0x5a0/0x5a0 [ 1250.873176] [<ffffffff8168a0e6>] drm_fb_helper_initial_config+0x206/0x7a0 [ 1250.873183] [<ffffffff81689ee0>] ? drm_fb_helper_set_par+0x90/0x90 [ 1250.873303] [<ffffffffa0b68690>] ? intel_fbdev_fini+0x140/0x140 [i915] [ 1250.873387] [<ffffffffa0b686b2>] intel_fbdev_initial_config+0x22/0x40 [i915] [ 1250.873391] [<ffffffff810b50ff>] async_run_entry_fn+0x7f/0x270 [ 1250.873394] [<ffffffff810a64b0>] process_one_work+0x3d0/0x960 [ 1250.873398] [<ffffffff810a641d>] ? process_one_work+0x33d/0x960 [ 1250.873401] [<ffffffff810a60e0>] ? max_active_store+0xf0/0xf0 [ 1250.873406] [<ffffffff810f6f9d>] ? do_raw_spin_lock+0x10d/0x1a0 [ 1250.873413] [<ffffffff810a767d>] worker_thread+0x8d/0x840 [ 1250.873419] [<ffffffff810a75f0>] ? create_worker+0x2e0/0x2e0 [ 1250.873426] [<ffffffff810b0454>] kthread+0x194/0x1c0 [ 1250.873432] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60 [ 1250.873438] [<ffffffff810f095d>] ? trace_hardirqs_on+0xd/0x10 [ 1250.873446] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60 [ 1250.873453] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60 [ 1250.873457] [<ffffffff81b12277>] ret_from_fork+0x27/0x40 [ 1250.873460] Object at ffff88074cdd2608, in cache kmalloc-32 size: 32 However, when holding the mode_config.lock around the fb_helper, we have to be careful of any callbacks that may reenter the fb_helper and so try to reacquire the mode_config.lock (e.g. register_framebuffer). To avoid the mutex recursion, we have to rearrange the sequence to move the registration into the caller outside of the mode_config.lock. v2: drop the 1; following the lockdep assertion inside the for(;;), I anticipated an error that doesn't happen! Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98826 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161129120217.7344-1-chris@chris-wilson.co.uk
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Dec 2, 2016
GIT 8375913f32f3e6f5bbdb18bd36046a07bbfb7654
commit e8d7c33232e5fdfa761c3416539bc5b4acd12db5
Author: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Date: Sun Nov 27 19:32:32 2016 +0300
md/raid5: limit request size according to implementation limits
Current implementation employ 16bit counter of active stripes in lower
bits of bio->bi_phys_segments. If request is big enough to overflow
this counter bio will be completed and freed too early.
Fortunately this not happens in default configuration because several
other limits prevent that: stripe_cache_size * nr_disks effectively
limits count of active stripes. And small max_sectors_kb at lower
disks prevent that during normal read/write operations.
Overflow easily happens in discard if it's enabled by module parameter
"devices_handle_discard_safely" and stripe_cache_size is set big enough.
This patch limits requests size with 256Mb - 8Kb to prevent overflows.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Shaohua Li <shli@kernel.org>
Cc: Neil Brown <neilb@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Shaohua Li <shli@fb.com>
commit 1a0ec5c30c37d29e4435a45e75c896f91af970bd
Author: JackieLiu <liuyun01@kylinos.cn>
Date: Tue Nov 29 11:57:30 2016 +0800
md/raid5-cache: do not need to set STRIPE_PREREAD_ACTIVE repeatedly
R5c_make_stripe_write_out has set this flag, do not need to set again.
Signed-off-by: JackieLiu <liuyun01@kylinos.cn>
Signed-off-by: Shaohua Li <shli@fb.com>
commit dbd22c8d7fc6276a48627e57a5605cf9565de78a
Author: JackieLiu <liuyun01@kylinos.cn>
Date: Tue Nov 29 11:13:20 2016 +0800
md/raid5-cache: remove the unnecessary next_cp_seq field from the r5l_log
The next_cp_seq field is useless, remove it.
Signed-off-by: JackieLiu <liuyun01@kylinos.cn>
Signed-off-by: Shaohua Li <shli@fb.com>
commit bc8f167f9c4656b7a972936237e9c38e6ab80c67
Author: JackieLiu <liuyun01@kylinos.cn>
Date: Mon Nov 28 16:19:20 2016 +0800
md/raid5-cache: release the stripe_head at the appropriate location
If we released the 'stripe_head' in r5c_recovery_flush_log,
ctx->cached_list will both release the data-parity stripes and
data-only stripes, which will become empty.
And we also need to use the data-only stripes in
r5c_recovery_rewrite_data_only_stripes, so we should wait util rewrite
data-only stripes is done before releasing them.
Reviewed-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: JackieLiu <liuyun01@kylinos.cn>
Signed-off-by: Shaohua Li <shli@fb.com>
commit fc833c2a2f4129c42efdaed64b9eb6e9ae5fdcee
Author: JackieLiu <liuyun01@kylinos.cn>
Date: Mon Nov 28 16:19:19 2016 +0800
md/raid5-cache: use ring add to prevent overflow
'write_pos' must be protected with 'r5l_ring_add', or it may overflow
Signed-off-by: JackieLiu <liuyun01@kylinos.cn>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
commit 9b69173e5c6000b2c6fafc5085dcd7b173f073c8
Author: JackieLiu <liuyun01@kylinos.cn>
Date: Mon Nov 28 16:19:18 2016 +0800
md/raid5-cache: remove unnecessary function parameters
The function parameter 'recovery_list' is not used in
body, we can delete it
Signed-off-by: JackieLiu <liuyun01@kylinos.cn>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
commit 462eb7d87297dae5837f3445b68b79e835ab0d6c
Author: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Date: Sat Nov 26 10:57:14 2016 +0800
raid5-cache: don't set STRIPE_R5C_PARTIAL_STRIPE flag while load stripe into cache
r5c_recovery_load_one_stripe should not set STRIPE_R5C_PARTIAL_STRIPE flag,as
the data-only stripe may be STRIPE_R5C_FULL_STRIPE stripe. The state machine
would release the stripe later and add it into neither r5c_cached_full_stripes
list or r5c_cached_partial_stripes list and set correct flag.
Reviewed-by: JackieLiu <liuyun01@kylinos.cn>
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Shaohua Li <shli@fb.com>
commit 5b52b1d37a6fe92bb95c949d56ffd9ec3b7a72b3
Author: Paul Moore <paul@paul-moore.com>
Date: Tue Nov 29 16:57:48 2016 -0500
netns: avoid disabling irq for netns id
Bring back commit bc51dddf98c9 ("netns: avoid disabling irq for netns
id") now that we've fixed some audit multicast issues that caused
problems with original attempt. Additional information, and history,
can be found in the links below:
* https://github.com/linux-audit/audit-kernel/issues/22
* https://github.com/linux-audit/audit-kernel/issues/23
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit ef256ce8a87ebecc335bd3c42280030e46428362
Author: Paul Moore <paul@paul-moore.com>
Date: Tue Nov 29 16:53:26 2016 -0500
audit: don't ever sleep on a command record/message
Sleeping on a command record/message in audit_log_start() could slow
something, e.g. auditd, from doing something important, e.g. clean
shutdown, which could present problems on a heavily loaded system.
This patch allows tasks to bypass any queue restrictions if they are
logging a command record/message.
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit 2934a794d81231ce905cdb5fa1f02e776c26c78b
Author: Paul Moore <paul@paul-moore.com>
Date: Tue Nov 29 16:53:26 2016 -0500
audit: handle a clean auditd shutdown with grace
When auditd stops cleanly it sets 'auditd_pid' to 0 with an
AUDIT_SET message, in this case we should reset our backlog
queues via the auditd_reset() function. This patch also adds
a 'auditd_pid' check to the top of kauditd_send_unicast_skb()
so we can fail quicker.
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit 917a7707a4a49b3b0d35c53cac40d94bbfa8060b
Author: Paul Moore <paul@paul-moore.com>
Date: Tue Nov 29 16:53:25 2016 -0500
audit: wake up kauditd_thread after auditd registers
This patch was suggested by Richard Briggs back in 2015, see the link
to the mail archive below. Unfortunately, that patch is no longer
even remotely valid due to other changes to the code.
* https://www.redhat.com/archives/linux-audit/2015-October/msg00075.html
Suggested-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit 5e6dbd54309b9ddeaa595e5c1015351617bbcc2d
Author: Paul Moore <paul@paul-moore.com>
Date: Tue Nov 29 16:53:25 2016 -0500
audit: rework audit_log_start()
The backlog queue handling in audit_log_start() is a little odd with
some questionable design decisions, this patch attempts to rectify
this with the following changes:
* Never make auditd wait, ignore any backlog limits as we need auditd
awake so it can drain the backlog queue.
* When we hit a backlog limit and start dropping records, don't wake
all the tasks sleeping on the backlog, that's silly. Instead, let
kauditd_thread() take care of waking everyone once it has had a chance
to drain the backlog queue.
* Don't keep a global backlog timeout countdown, make it per-task. A
per-task timer means we won't have all the sleeping tasks waking at
the same time and hammering on an already stressed backlog queue.
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit 8b4c3202464e880cb546a2ee6b4a64877c83d2ec
Author: Paul Moore <paul@paul-moore.com>
Date: Tue Nov 29 16:53:25 2016 -0500
audit: rework the audit queue handling
The audit record backlog queue has always been a bit of a mess, and
the moving the multicast send into kauditd_thread() from
audit_log_end() only makes things worse. This patch attempts to fix
the backlog queue with a better design that should hold up better
under load and have less of a performance impact at syscall
invocation time.
While it looks like there is a log going on in this patch, the main
change is the move from a single backlog queue to three queues:
* A queue for holding records generated from audit_log_end() that
haven't been consumed by kauditd_thread() (audit_queue).
* A queue for holding records that have been sent via multicast but
had a temporary failure when sending via unicast and need a resend
(audit_retry_queue).
* A queue for holding records that haven't been sent via unicast
because no one is listening (audit_hold_queue).
Special care is taken in this patch to ensure that the proper
record ordering is preserved, e.g. we send everything in the hold
queue first, then the retry queue, and finally the main queue.
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit 2af6ea0994c77c87ffb8620df94498fb288dff55
Author: Paul Moore <paul@paul-moore.com>
Date: Tue Nov 29 16:53:24 2016 -0500
audit: rename the queues and kauditd related functions
The audit queue names can be shortened and the record sending
helpers associated with the kauditd task could be named better, do
these small cleanups now to make life easier once we start reworking
the queues and kauditd code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit 6bb9f3cfb0f5f5d91029bdc3b991de281864179b
Author: Paul Moore <paul@paul-moore.com>
Date: Tue Nov 29 16:53:24 2016 -0500
audit: queue netlink multicast sends just like we do for unicast sends
Sending audit netlink multicast messages is bad for all the same
reasons that sending audit netlink unicast messages is bad, so this
patch reworks things so that we don't do the multicast send in
audit_log_end(), we do it from the dedicated kauditd_thread thread just
as we do for unicast messages.
See the GitHub issues below for more information/history:
* https://github.com/linux-audit/audit-kernel/issues/23
* https://github.com/linux-audit/audit-kernel/issues/22
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit 04c7b99a807fa189cd9b85b2f75767f59ab9b7d1
Author: Paul Moore <paul@paul-moore.com>
Date: Tue Nov 29 16:53:23 2016 -0500
audit: fixup audit_init()
Make sure everything is initialized before we start the kauditd_thread
and don't emit the "initialized" record until everything is finished.
We also panic with a descriptive message if we can't start the
kauditd_thread.
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit d93f4097376007702a26886c836568a6f9e8c5dd
Author: Richard Guy Briggs <rbriggs@redhat.com>
Date: Tue Nov 29 16:53:23 2016 -0500
audit: move kaudit thread start from auditd registration to kaudit init (#2)
Richard made this change some time ago but Eric backed it out because
the rest of the supporting code wasn't ready. In order to move the
netlink multicast send to kauditd_thread we need to ensure the
kauditd_thread is always running, so restore commit 6ff5e459 ("audit:
move kaudit thread start from auditd registration to kaudit init").
Signed-off-by: Richard Guy Briggs <rbriggs@redhat.com>
[PM: brought forward and merged based on Richard's old patch]
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit d6ba7a9c8b5a6a42e8f7a7efd8345122611b535c
Author: Jonathan Corbet <corbet@lwn.net>
Date: Fri Nov 18 17:21:32 2016 -0700
doc: Sphinxify the tracepoint docbook
Convert the tracepoint docbook template to RST and add it to the core-api
manual. No changes to the actual text beyond the mechanical formatting
conversion.
Cc: Jason Baron <jbaron@redhat.com>
Cc: William Cohen <wcohen@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
commit 8da3dc53347205b0d32ded4ab9c96dcf336061d8
Author: Jonathan Corbet <corbet@lwn.net>
Date: Fri Nov 18 17:17:11 2016 -0700
doc: debugobjects: actually pull in the kerneldoc comments
Add the appropriate markup to get the kerneldoc comments out of
lib/debugobjects.c that have never seen the light of day until now.
A logical next step, left for the reader at the moment, is to move the
function descriptions *out* of debug-objects.rst and into the kerneldoc
comments themselves.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
commit 93dc3a112bf8e5f97e3d9744595934ff31708764
Author: Jonathan Corbet <corbet@lwn.net>
Date: Fri Nov 18 17:06:13 2016 -0700
doc: Convert the debugobjects DocBook template to sphinx
A couple of the most minor heading tweaks, otherwise no changes to the text
itself beyond the mechanical conversion.
Note that the inclusion of the kerneldoc comments from the source has never
worked, since exported symbols were asked for and none of those functions
are exported to modules. It doesn't work here either :)
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
commit 0bb33e25e5c91f69304f3799609a52354dca1af4
Author: Jonathan Corbet <corbet@lwn.net>
Date: Fri Nov 18 16:04:48 2016 -0700
docs: Move the 802.11 guide into the driver-api manual
Put this documentation with the other driver docs and try to keep the top
level reasonably clean.
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
commit 9367a9cf15eae56d36b3ac76738970bef3698e63
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date: Tue Nov 29 13:19:27 2016 -0800
fixup! rcu: Add functions to test for trivial grace periods
commit 19f52e52fedc204e3a7a1ab568b9208064ccfb1e
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date: Tue Nov 29 13:13:47 2016 -0800
rcu: Add functions to test for trivial grace periods
Under some circumstances, RCU grace periods are zero cost. For
RCU-preempt, this is the case during boot, and for RCU-bh and RCU-sched,
this is the case if there is only one CPU. This means that RCU users
might wish to dispense with grace-period-avoidance strategies when
grace periods are zero cost, so this commit adds rcu_trivial_gp(),
rcu_bh_trivial_gp(), and rcu_sched_trivial_gp() to test for these
conditions. Because the conditions leading to zero-cost grace periods
can change at any time (for example, when a second CPU is onlined), these
functions should be used as performance hints, and must not be relied
on for correctness. For example, even if rcu_trivial_gp() returns true,
you are required to invoke synchronize_rcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
commit 8902bd9bfc63a1dbed31a6a44dc895a33c6238e9
Author: Amir Goldstein <amir73il@gmail.com>
Date: Tue Nov 22 11:47:09 2016 +0200
ovl: show redirect_dir mount option
Show the value of redirect_dir in /proc/mounts.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
commit a53ca63502e62ca459de32821753c8227dc94197
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Nov 29 12:02:17 2016 +0000
drm: Protect fb_helper list manipulation with a mutex
Though we only walk the kernel_fb_helper_list inside a panic (or single
thread debugging), we still need to protect the list manipulation on
creating/removing a framebuffer device in order to prevent list
corruption.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129120217.7344-3-chris@chris-wilson.co.uk
commit 64e94407fb5a4128636c2b15b38fa6e71a427228
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Nov 29 12:02:16 2016 +0000
drm: Pull together probe + setup for drm_fb_helper
drm_fb_helper_probe_connector_modes() is always called before
drm_setup_crtcs(), so just move the call into drm_setup_crtcs for a
small bit of code compaction.
Note that register_framebuffer will do a modeset (when fbcon is enabled)
and hence must be moved out of the critical section. A follow-up patch
will add new locking for the fb list, hence move all the related
registration code together.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129120217.7344-2-chris@chris-wilson.co.uk
commit 966a6a13c6660b499caf2932de22ae70c1317786
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Nov 29 12:02:15 2016 +0000
drm: Hold mode_config.lock to prevent hotplug whilst setting up crtcs
The fb_helper->connector_count is modified when a new connector is
constructed following a hotplug event (e.g. DP-MST). This causes trouble
for drm_setup_crtcs() and friends that assume that fb_helper is
constant:
[ 1250.872997] BUG: KASAN: slab-out-of-bounds in drm_setup_crtcs+0x320/0xf80 at addr ffff88074cdd2608
[ 1250.873020] Write of size 40 by task kworker/u8:3/480
[ 1250.873039] CPU: 2 PID: 480 Comm: kworker/u8:3 Tainted: G U 4.9.0-rc6+ #285
[ 1250.873043] Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
[ 1250.873050] Workqueue: events_unbound async_run_entry_fn
[ 1250.873056] ffff88070f9d78f0 ffffffff814b72aa ffff88074e40c5c0 ffff88074cdd2608
[ 1250.873067] ffff88070f9d7918 ffffffff8124ff3c ffff88070f9d79b0 ffff88074cdd2600
[ 1250.873079] ffff88074e40c5c0 ffff88070f9d79a0 ffffffff812501e4 0000000000000005
[ 1250.873090] Call Trace:
[ 1250.873099] [<ffffffff814b72aa>] dump_stack+0x67/0x9d
[ 1250.873106] [<ffffffff8124ff3c>] kasan_object_err+0x1c/0x70
[ 1250.873113] [<ffffffff812501e4>] kasan_report_error+0x204/0x4f0
[ 1250.873120] [<ffffffff81698df0>] ? drm_dev_printk+0x140/0x140
[ 1250.873127] [<ffffffff81250ac3>] kasan_report+0x53/0x60
[ 1250.873134] [<ffffffff81688b40>] ? drm_setup_crtcs+0x320/0xf80
[ 1250.873142] [<ffffffff8124f18e>] check_memory_region+0x13e/0x1a0
[ 1250.873147] [<ffffffff8124f5f3>] memset+0x23/0x40
[ 1250.873154] [<ffffffff81688b40>] drm_setup_crtcs+0x320/0xf80
[ 1250.873161] [<ffffffff810be7c5>] ? wake_up_q+0x45/0x80
[ 1250.873169] [<ffffffff81b0c180>] ? mutex_lock_nested+0x5a0/0x5a0
[ 1250.873176] [<ffffffff8168a0e6>] drm_fb_helper_initial_config+0x206/0x7a0
[ 1250.873183] [<ffffffff81689ee0>] ? drm_fb_helper_set_par+0x90/0x90
[ 1250.873303] [<ffffffffa0b68690>] ? intel_fbdev_fini+0x140/0x140 [i915]
[ 1250.873387] [<ffffffffa0b686b2>] intel_fbdev_initial_config+0x22/0x40 [i915]
[ 1250.873391] [<ffffffff810b50ff>] async_run_entry_fn+0x7f/0x270
[ 1250.873394] [<ffffffff810a64b0>] process_one_work+0x3d0/0x960
[ 1250.873398] [<ffffffff810a641d>] ? process_one_work+0x33d/0x960
[ 1250.873401] [<ffffffff810a60e0>] ? max_active_store+0xf0/0xf0
[ 1250.873406] [<ffffffff810f6f9d>] ? do_raw_spin_lock+0x10d/0x1a0
[ 1250.873413] [<ffffffff810a767d>] worker_thread+0x8d/0x840
[ 1250.873419] [<ffffffff810a75f0>] ? create_worker+0x2e0/0x2e0
[ 1250.873426] [<ffffffff810b0454>] kthread+0x194/0x1c0
[ 1250.873432] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60
[ 1250.873438] [<ffffffff810f095d>] ? trace_hardirqs_on+0xd/0x10
[ 1250.873446] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60
[ 1250.873453] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60
[ 1250.873457] [<ffffffff81b12277>] ret_from_fork+0x27/0x40
[ 1250.873460] Object at ffff88074cdd2608, in cache kmalloc-32 size: 32
However, when holding the mode_config.lock around the fb_helper, we have
to be careful of any callbacks that may reenter the fb_helper and so try
to reacquire the mode_config.lock (e.g. register_framebuffer). To avoid
the mutex recursion, we have to rearrange the sequence to move the
registration into the caller outside of the mode_config.lock.
v2: drop the 1; following the lockdep assertion inside the for(;;), I
anticipated an error that doesn't happen!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98826
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129120217.7344-1-chris@chris-wilson.co.uk
commit 033a28bac0a20de78426e6faf3414637e4775fbc
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date: Tue Nov 29 11:06:05 2016 -0800
rcu: Allow boot-time use of cond_resched_rcu_qs()
The cond_resched_rcu_qs() macro is used to force RCU quiescent states into
long-running in-kernel loops. However, some of these loops can execute
during early boot when interrupts are disabled, and during which time
it is therefore illegal to enter the scheduler. This commit therefore
makes cond_resched_rcu_qs() be a no-op during early boot.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
commit c3fdff480d5d5e23a6e5529d33d1c01060491e44
Author: Paul Moore <paul@paul-moore.com>
Date: Sun Nov 20 16:47:55 2016 -0500
audit: add support for session ID user filter
Define AUDIT_SESSIONID in the uapi and add support for specifying user
filters based on the session ID. Also add the new session ID filter
to the feature bitmap so userspace knows it is available.
https://github.com/linux-audit/audit-kernel/issues/4
RFE: add a session ID filter to the kernel's user filter
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: combine multiple patches from Richard into this one]
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit f7b7bee75e06cbdce864f7b313ac05555e7eff6b
Author: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Date: Sat Nov 26 10:57:13 2016 +0800
raid5-cache: add another check conditon before replaying one stripe
New stripe that was just allocated has no STRIPE_R5C_CACHING state too,
add this check condition could avoid unnecessary replaying for empty stripe.
r5l_recovery_replay_one_stripe would reset stripe for any case, delete it
to make code more clean.
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Shaohua Li <shli@fb.com>
commit 9b57da0630c9fd36ed7a20fc0f98dc82cc0777fa
Author: Florian Westphal <fw@strlen.de>
Date: Tue Nov 29 02:17:34 2016 +0100
netfilter: ipv6: nf_defrag: drop mangled skb on ream error
Dmitry Vyukov reported GPF in network stack that Andrey traced down to
negative nh offset in nf_ct_frag6_queue().
Problem is that all network headers before fragment header are pulled.
Normal ipv6 reassembly will drop the skb when errors occur further down
the line.
netfilter doesn't do this, and instead passed the original fragment
along. That was also fine back when netfilter ipv6 defrag worked with
cloned fragments, as the original, pristine fragment was passed on.
So we either have to undo the pull op, or discard such fragments.
Since they're malformed after all (e.g. overlapping fragment) it seems
preferrable to just drop them.
Same for temporary errors -- it doesn't make sense to accept (and
perhaps forward!) only some fragments of same datagram.
Fixes: 029f7f3b8701cc7ac ("netfilter: ipv6: nf_defrag: avoid/free clone operations")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Debugged-by: Andrey Konovalov <andreyknvl@google.com>
Diagnosed-by: Eric Dumazet <Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit 333ba053d145d6f9152f6b0311a345b876f0fed1
Author: Javier González <javier@cnexlabs.com>
Date: Mon Nov 28 22:39:14 2016 +0100
lightnvm: transform target get/set bad block
Since targets are given a virtual target device, it is necessary to
translate all communication between targets and the backend device.
Implement the translation layer for get/set bad block table.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit da2d7cb828ce2714c603827ac5a6e1c98a02e861
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:13 2016 +0100
lightnvm: use target nvm on target-specific ops.
On target-specific operations pass on nvm_tgt_dev instead of the generic
nvm device.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit a279006afa3377493c4240395c70430f2a9b0d2b
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:12 2016 +0100
lightnvm: introduce max_phys_sects helper function
Target devices do not have access to the device driver operations.
Introduce a helper function that exposes the max. number of physical
sectors supported by the underlying device.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 959e911b31981b52ed3f3d6e351b107bcb9163ef
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:11 2016 +0100
lightnvm: introduce helpers for generic ops in rrpc
Avoid calling media manager and device-specific operations directly from
rrpc. Create helper functions on lightnvm's core instead.
Signed-off-by: Javier González <javier@cnexlabs.com>
Made it work with null_blk as well.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 8e53624d44c1de31b1b0d4f500703669418a4c67
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:10 2016 +0100
lightnvm: eliminate nvm_lun abstraction in mm
In order to naturally support multi-target instances on an Open-Channel
SSD, targets should own the LUNs they get blocks from and manage
provisioning internally. This is done in several steps.
Since targets own the LUNs the are instantiated on top of and manage the
free block list internally, there is no need for a LUN abstraction in
the media manager. LUNs are intrinsically managed as in the physical
layout (ch:0,lun:0, ..., ch:0,lun:n, ch:1,lun:0, ch:1,lun:n, ...,
ch:m,lun:0, ch:m,lun:n) and given to the targets based on the target
creation ioctl. This simplifies LUN management and clears the path for a
partition manager to sit directly underneath LightNVM targets.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 2a02e627c245bfa987b97707123d7747d7b0e486
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:09 2016 +0100
lightnvm: eliminate nvm_block abstraction on mm
In order to naturally support multi-target instances on an Open-Channel
SSD, targets should own the LUNs they get blocks from and manage
provisioning internally. This is done in several steps.
A part of this transformation is that targets manage their blocks
internally. This patch eliminates the nvm_block abstraction and moves
block management to the target logic. The rrpc target is transformed.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit eec44565e9ab13bbf5b48864a68871eabf1115c1
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:08 2016 +0100
lightnvm: remove debug lun statistics from gennvm
Since LUNs are managed internally on targets, the media manager has no
access to the free LUN lists. Thus, debug functions that show LUN
information on the device should not be implemented on the media
manager, but rather on the target in itself.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 0ac4072eb10c9627415eb1ca511121156e20012c
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:07 2016 +0100
lightnvm: remove get_lun operation on gennvm
Since LUNs are managed internally on the target, there is no need for
the media manager to implement a get_lun operation.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 8e79b5cb1d3b8eceaf6862995952dd4de431dd99
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:06 2016 +0100
lightnvm: move block provisioning to targets
In order to naturally support multi-target instances on an Open-Channel
SSD, targets should own the LUNs they get blocks from and manage
provisioning internally. This is done in several steps.
This patch moves the block provisioning inside of the target and removes
the get/put block interface from the media manager.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 8176117b82e49e043d045f214ba7a892fba6b827
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:05 2016 +0100
lightnvm: manage lun partitions internally in mm
LUNs are exclusively owned by targets implementing a block device FTL.
Doing this reservation requires at the moment a 2-way callback gennvm
<-> target. The reason behind this is that LUNs were not assumed to
always be exclusively owned by targets. However, this design decision
goes against I/O determinism QoS (two targets would mix I/O on the same
parallel unit in the device).
This patch makes LUN reservation as part of the target creation on the
media manager. This makes that LUNs are always exclusively owned by the
target instantiated on top of them. LUN stripping and/or sharing should
be implemented on the target itself or the layers on top.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit de93434fcf74d41754a48e45365a5914e00bc0be
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:04 2016 +0100
lightnvm: remove gen_lun abstraction
The gen_lun abstraction in the generic media manager was conceived on
the assumption that a single target would instantiated on top of it.
This has complicated target design to implement multi-instances. Remove
this abstraction and move its logic to nvm_lun, which manages physical
lun geometry and operations.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 98379a12c54974ee5856dcf81781a5dc845505c3
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:03 2016 +0100
lightnvm: use constant name instead of value
There is a constant to refer to free blocks. Use it when marking bad
blocks instead of using a constant value
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit eb00352b5213e52419ac7dd8bbd84a1300fe4b5d
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:02 2016 +0100
lightnvm: remove unnecessary variables in rrpc
Before vectored I/Os were supported on rrpc, the physical address was
stored as part of the nvm_rqd request. This variable become obsolete
when the ppa_list was introduced. Cleanup this variable.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 0e5c3246dbb96b6870634e7d51b2490f05c976cf
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:01 2016 +0100
lightnvm: make address conversion functions global
Targets are assumed to used the same generic ppa format, where the
address is partitioned on ch:lun:block:pg:pl:sec. Thus, make the
function in charge of transforming the ppa address from a linear format
to the generic one available to all targets.
This function will be needed by the media manager in order to do target
mapping translations when targets are divided on different physical
partitions.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 7e4f64a9b3004ce592f21653c3b7781628862232
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:39:00 2016 +0100
lightnvm: cleanup unused target operations
Cleanup definition leftovers from old gennvm interface
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 17b25cfc873e6d7e2283cf8d77f2af93192484a5
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:38:59 2016 +0100
lightnvm: remove sysfs configuration interface
LightNVM used to be managed and configured through sysfs. Since the
introduction of management ioctls this interface is redundant and
outdated. Get rid of it.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit f0b01b6a610f99fb7683d0f5259bb65649b0fd78
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:38:58 2016 +0100
lightnvm: rrpc: split bios of size > 256kb
rrpc cannot handle bios of size > 256kb due to NVMe using a 64 bit
bitmap to signal I/O completion. If a larger bio comes, split it
explicitly.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 402ab9a89d7b5bab08a5534027b39d80085ec19b
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:38:57 2016 +0100
lightnvm: add ECC error codes
Add ECC error codes to enable the appropriate handling in the target.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit a24ba4644b7ae5af3cd2eb6992c237cb4548c45e
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:38:56 2016 +0100
lightnvm: export set bad block table
Bad blocks should be managed by block owners. This would be either
targets for data blocks or sysblk for system blocks.
In order to support this, export two functions: One to mark a block as
an specific type (e.g., bad block) and another to update the bad block
table on the device.
Move bad block management to rrpc.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 8a3c95ab385fb98621455807ae52b4454192f8c5
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:38:55 2016 +0100
lightnvm: do not protect block 0
Device blocks should be marked by the device and considered as bad
blocks by the media manager. Thus, do not make assumptions on which
blocks are going to be used by the device. In doing so we might lose
valid blocks from the free list.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit bb3149792e0ed52cf5f457dda4c9bf9c5bda1542
Author: Javier González <jg@lightnvm.io>
Date: Mon Nov 28 22:38:54 2016 +0100
lightnvm: enable to send hint to erase command
Erases might be subject to host hints. An example is multi-plane
programming to erase blocks in parallel. Enable targets to specify this
hint.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 3dc87dd048dc442bab633e85bfb96c893612d765
Author: Matias Bjørling <m@bjorling.me>
Date: Mon Nov 28 22:38:53 2016 +0100
nvme: lightnvm: attach lightnvm sysfs to nvme block device
Previously, LBA read and write were not supported in the lightnvm
specification. Now that it supports it, lets use the traditional
NVMe gendisk, and attach the lightnvm sysfs geometry export.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 7498e99fc51ca60b960ef79061e0e7b521feb07e
Author: Matias Bjørling <m@bjorling.me>
Date: Mon Nov 28 22:38:52 2016 +0100
nvme: lightnvm: frees wrong cmd structure
When struct nvme_request was introduced, the nvme_nvm_submit_io was
converted to the new interface. The interface moves nvme_nvm_command
data structure into the struct request pdu. On io completion, rq->cmd is
freed, which should have been the dereferenced pdu nvme_request->cmd.
Fixes: d49187e97e94 "nvme: introduce struct nvme_request"
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit e59d8bb574f6d8097e7e14981440dc37425fddc6
Author: Pan Bian <bianpan2016@163.com>
Date: Tue Nov 29 07:33:07 2016 +0800
ALSA: echoaudio: Fix improper return value in function load_asic
When the second call to load_asic_generic() fails in function
load_asic(), "false" is returned. The real value of "false" is 0, which
indicates success in the context. As a result, the execution status and
the return value may be inconsistent. This patch fixes the bug.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188761
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
commit 40931b85113dad7881d49e8759e5ad41d30a5e6c
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Nov 25 07:46:20 2016 -0800
mlx4: give precise rx/tx bytes/packets counters
mlx4 stats are chaotic because a deferred work queue is responsible
to update them every 250 ms.
Even sampling stats every one second with "sar -n DEV 1" gives
variations like the following :
lpaa23:~# sar -n DEV 1 10 | grep eth0 | cut -c1-65
07:39:22 eth0 146877.00 3265554.00 9467.15 4828168.50
07:39:23 eth0 146587.00 3260329.00 9448.15 4820445.98
07:39:24 eth0 146894.00 3259989.00 9468.55 4819943.26
07:39:25 eth0 110368.00 2454497.00 7113.95 3629012.17 <<>>
07:39:26 eth0 146563.00 3257502.00 9447.25 4816266.23
07:39:27 eth0 145678.00 3258292.00 9389.79 4817414.39
07:39:28 eth0 145268.00 3253171.00 9363.85 4809852.46
07:39:29 eth0 146439.00 3262185.00 9438.97 4823172.48
07:39:30 eth0 146758.00 3264175.00 9459.94 4826124.13
07:39:31 eth0 146843.00 3256903.00 9465.44 4815381.97
Average: eth0 142827.50 3179259.70 9206.30 4700578.16
This patch allows rx/tx bytes/packets counters being folded at the
time we need stats.
We now can fetch stats every 1 ms if we want to check NIC behavior
on a small time window. It is also easier to detect anomalies.
lpaa23:~# sar -n DEV 1 10 | grep eth0 | cut -c1-65
07:42:50 eth0 142915.00 3177696.00 9212.06 4698270.42
07:42:51 eth0 143741.00 3200232.00 9265.15 4731593.02
07:42:52 eth0 142781.00 3171600.00 9202.92 4689260.16
07:42:53 eth0 143835.00 3192932.00 9271.80 4720761.39
07:42:54 eth0 141922.00 3165174.00 9147.64 4679759.21
07:42:55 eth0 142993.00 3207038.00 9216.78 4741653.05
07:42:56 eth0 141394.06 3154335.64 9113.85 4663731.73
07:42:57 eth0 141850.00 3161202.00 9144.48 4673866.07
07:42:58 eth0 143439.00 3180736.00 9246.05 4702755.35
07:42:59 eth0 143501.00 3210992.00 9249.99 4747501.84
Average: eth0 142835.66 3182165.93 9206.98 4704874.08
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 6a30c5a73fdc6c51cae4a833bb21375f26d5ccba
Author: Alexey Brodkin <abrodkin@synopsys.com>
Date: Tue Nov 22 14:16:36 2016 +0300
ARC: axs10x: really enable ARC PGU
Up until now we had ARC PGU not enabled in axs10x defconfigs trying
to not bloat kernel image again with yet another drivers and subsystems.
This change configures ARC PGU (as well as DRM bits it depends on)
to be built as a module and so those who need LCD screen to work on
axs10x may bundle built .ko files in their target's file-system with
help of the following command on host:
------------->8-------------
make INSTALL_MOD_PATH=_path_to_target_fs_ modules_install
------------->8-------------
and later on target with commands as simple as:
------------->8-------------
modprobe adv7511.ko
modprobe arcpgu.ko
------------->8-------------
get LCD working.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit 98d3e6d4a04f3d1b13a2d547f0d3f2d7f42f4f0e
Author: Vineet Gupta <vgupta@synopsys.com>
Date: Fri Nov 18 14:19:27 2016 -0800
ARC: rename Zebu platform support to HAPS
There are more ARC Linux HAPS users than Zebu ones.
Same kernel would work fine on both, even with embedded DT, assuming the FPGA
bitfile configuration is same
Suggested-by: Francois Bedard <fbedard@ynopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit f3fd0d516943e769e51c521311ab13dd65c7898f
Author: Arnd Bergmann <arnd@arndb.de>
Date: Tue Nov 22 15:33:44 2016 +0100
clocksource: nps: avoid maybe-uninitialized warning
We get a harmless false-positive warning with the newly added nps
clocksource driver:
drivers/clocksource/timer-nps.c: In function 'nps_setup_clocksource':
drivers/clocksource/timer-nps.c:102:6: error: 'nps_timer1_freq' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Gcc here fails to identify that IS_ERR() is only true if PTR_ERR()
has a nonzero value. Using PTR_ERR_OR_ZERO() to convert the result
first makes this obvious and shuts up the warning.
Fixes: 0ee4d9922df5 ("clocksource: Add clockevent support to NPS400 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit ab321058267b4df1cdd515fffa3ef380ed28ecd2
Author: Noam Camus <noamca@mellanox.com>
Date: Thu Nov 17 09:12:43 2016 +0200
clocksource: Add clockevent support to NPS400 driver
Till now we used clockevent from generic ARC driver.
This was enough as long as we worked with simple multicore SoC.
When we are working with multithread SoC each HW thread can be
scheduled to receive timer interrupt using timer mask register.
This patch will provide a way to control clock events per HW thread.
The design idea is that for each core there is dedicated register
(TSI) serving all 16 HW threads.
The register is a bitmask with one bit for each HW thread.
When HW thread wants that next expiration of timer interrupt will
hit it then the proper bit should be set in this dedicated register.
When timer expires all HW threads within this core which their bit
is set at the TSI register will be interrupted.
Driver can be used from device tree by:
compatible = "ezchip,nps400-timer0" <-- for clocksource
compatible = "ezchip,nps400-timer1" <-- for clockevent
Note that name convention for timer0/timer1 was taken from legacy
ARC design. This design is our base before adding HW threads.
For backward compatibility we keep "ezchip,nps400-timer" for clocksource
Signed-off-by: Noam Camus <noamca@mellanox.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
commit a08a8e2893015a7fc25b14d75c9fc7a222ae7b38
Author: Noam Camus <noamca@mellanox.com>
Date: Wed Nov 16 08:31:12 2016 +0200
clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer
nps_setup_clocksource() should take node as only argument as defined by
typedef int (*of_init_fn_1_ret)(struct device_node *)
Therefore need to replace:
int __init nps_setup_clocksource(struct device_node *node, struct clk *clk)
with
int __init nps_setup_clocksource(struct device_node *node)
This patch also serve as preparation for next patch which add support
for clockevents to nps400.
Specifically we add new function nps_get_timer_clk() to serve clocksource
and later clockevent registration.
Signed-off-by: Noam Camus <noamca@mellanox.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
commit 6e022b60285a6fbf8229e1ec268f2d8f55d35477
Author: Noam Camus <noamca@mellanox.com>
Date: Wed Nov 16 08:31:11 2016 +0200
soc: Support for NPS HW scheduling
This new header file is for NPS400 SoC (part of ARC architecture).
The header file includes macros for save/restore of HW scheduling.
The control of HW scheduling is achieved by writing core registers.
This code was moved from arc/plat-eznps so it can be used
from drivers/clocksource/, available only for CONFIG_EZNPS_MTM_EXT.
Signed-off-by: Noam Camus <noamca@mellanox.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
commit b8531ea8d22f5678a2a6b9cce7ad0ce02d2c4482
Author: Vineet Gupta <vgupta@synopsys.com>
Date: Mon Oct 31 13:46:38 2016 -0700
clocksource: import ARC timer driver
This adds support for
- CONFIG_ARC_TIMERS : legacy 32-bit TIMER0 and TIMER1 which count UP
from @CNT to @LIMIT, before optionally triggering an interrupt.
These are programmed using ARC auxiliary register interface.
These are present in all ARC cores (ARC700 and ARC HS38)
TIMER0 serves as clockevent for all ARC linux builds.
TIMER1 is used for clocksource in arc700 builds.
- CONFIG_ARC_TIMERS_64BIT: 64-bit counters, RTC and GFRC found in
ARC HS38 cores. These are independnet IP blocks with different
programming model respectively.
Link: http://lkml.kernel.org/r/20161111231132.GA4186@mai
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit f201a7e1cf0592aa06931e1624d5e63c8116e765
Author: Vineet Gupta <vgupta@synopsys.com>
Date: Mon Oct 31 13:06:19 2016 -0700
ARC: breakout timer include code into separate header ...
... which allows for use in drivers/clocksource later
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit 43c7919a4133d80845573a9b8047e8bf10ea0eca
Author: Vineet Gupta <vgupta@synopsys.com>
Date: Mon Oct 31 11:27:08 2016 -0700
ARC: move mcip.h into include/soc and adjust the includes
Also remove the dependency on ARCv2, to increase compile coverage for
!ARCV2 builds
Acked-by: Daniel Lezcano <daniel.lezcnao@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit 6387055728a2a5a105433d8c7dd2e0fc17d999e2
Author: Vineet Gupta <vgupta@synopsys.com>
Date: Mon Oct 31 11:09:34 2016 -0700
ARC: breakout aux handling into a separate header
ARC timers use aux registers for programming and this paves way for
moving ARC timer drivers into drivers/clocksource
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit 21857529f5fe5081b74cb0da4785fa64ea332995
Author: Vineet Gupta <vgupta@synopsys.com>
Date: Mon Oct 31 13:26:25 2016 -0700
ARC: time: move time_init() out of the driver
to allow future git mv of the driver into drivers/clocksource
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit 8a5b823f98ad30bb334d25c8123e8d5766c4fbf1
Author: Vineet Gupta <vgupta@synopsys.com>
Date: Mon Oct 31 14:26:41 2016 -0700
ARC: timer: gfrc, rtc: build under same option (64-bit timers)
The original distinction was done as they were developed at different
times and primarily because they are specific to UP (RTC) and SMP (GFRC).
But given that driver handles that at runtime, (i.e. not allowing
RTC as clocksource in SMP), we can simplify things a bit.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit d0f76f838d74ffbe0f206d1fb3d6f0b01b372353
Author: Vineet Gupta <vgupta@synopsys.com>
Date: Mon Oct 31 13:02:31 2016 -0700
ARC: timer: gfrc, rtc: Read BCR to detect whether hardware exists ...
... don't rely on cpuinfo populated in arc boot code. This paves way for
moving this code in drivers/clocksource/
And while at it, convert the WARN() to pr_warn() as sugested by Daniel
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit 0081d7bcd0a7663d0240befdb634b65bba04c13f
Author: Vineet Gupta <vgupta@synopsys.com>
Date: Thu Nov 3 11:38:52 2016 -0700
ARC: timer: gfrc, rtc: deuglify big endian code
A standard "C" shift will be handled appropriately by the compiler
depending on the endian for the build. So we don't need the
explicit distinction in code
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit 76fb051d42945d142fe265b6ec79e06aa9cfb250
Author: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon Nov 21 16:07:05 2016 +0000
ARM: mm: allow set_memory_*() to be used on the vmalloc region
We can allow modules to be loaded into the vmalloc region, where they
should also benefit from the same protections as those loaded into
the more efficient module region. Allow these functions to operate
there as well.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
commit 580218f9678e76f712a1cf6cff5a903917fa9558
Author: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon Nov 21 16:02:08 2016 +0000
ARM: mm: fix set_memory_*() bounds checks
The set_memory_*() bounds checks are buggy on several fronts:
1. They fail to round the region size up if the passed address is not
page aligned.
2. The region check was incomplete, and didn't correspond with what
was being asked of apply_to_page_range()
So, rework change_memory_common() to fix these problems, adding an
"in_region()" helper to determine whether the start & size fit within
the provided region start and stop addresses.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
commit d3df9bc5fb5d838b049f32a476721eadbc349553
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date: Tue Nov 29 05:49:06 2016 -0800
rcu: Once again use NMI-based stack traces in stall warnings
This commit is for all intents and purposes a revert of bc1dce514e9b
("rcu: Don't use NMIs to dump other CPUs' stacks"). The reason to suppose
that this can now safely be reverted is the presence of 42a0bb3f7138
("printk/nmi: generic solution for safe printk in NMI"), which is said
to have made NMI-based stack dumps safe.
However, this reversion keeps one nice property of bc1dce514e9b
("rcu: Don't use NMIs to dump other CPUs' stacks"), namely that
only those CPUs blocking the grace period are dumped. The new
trigger_single_cpu_backtrace() is used to make this happen, as
suggested by Josh Poimboeuf.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Not-yet-signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
commit f8045446ca778333e960dcb9e30a5858ff2b8c20
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date: Mon Nov 28 12:08:49 2016 -0800
srcu: Force full grace-period ordering
If a process invokes synchronize_srcu(), is delayed just the right amount
of time, and thus does not sleep when waiting for the grace period to
complete, there is no ordering between the end of the grace period and
the code following the synchronize_srcu(). Similarly, there can be a
lack of ordering between the end of the SRCU grace period and callback
invocation.
This commit adds the necessary ordering.
Reported-by: Lance Roy <ldr709@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
commit 6a8b2ca702b279bea0e8f0363056439352e2081c
Author: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
Date: Mon Nov 28 07:07:17 2016 +0300
ARC: mm: PAE40: Fix crash at munmap
commit 1c3c90930392 broke PAE40. Macro pfn_pte(pfn, prot) creates paddr
from pfn, but the page shift was getting truncated to 32 bits since we lost
the proper cast to 64 bits (for PAE400
Instead of reverting that commit, use a better helper which is 32/64 bits
safe just like ARM implementation.
Fixes: 1c3c90930392 ("ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS")
Cc: <stable@vger.kernel.org> #4.4+
Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
[vgupta: massaged changelog]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit 2349b533167315199b00b15db891ddc45b2c909d
Author: subhashj@codeaurora.org <subhashj@codeaurora.org>
Date: Wed Nov 23 16:33:19 2016 -0800
scsi: ufs: fix default power mode to FAST/SLOW
We would by default like to run in FAST/SLOW mode instead
of FASTAUTO/SLOWAUTO mode for performance reasons. This
change sets the default speed mode to FAST/SLOW mode.
Reviewed-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit 0b257734344aa89b565bd148ff94f29aa873ffa6
Author: subhashj@codeaurora.org <subhashj@codeaurora.org>
Date: Wed Nov 23 16:33:08 2016 -0800
scsi: ufs: optimize system suspend handling
Consider following sequence of events:
1. UFS is runtime suspended, link_state = Hibern8, device_state = sleep
2. System goes into system suspend, ufshcd_system_suspend() brings both
link and device to active state and then puts the device in Power_Down
state and link in OFF state.
3. System resumes at some later point in time, ufshcd_system_resume()
doesn't do anything as UFS state is runtime suspended. Note that link
is still on OFF state and device is in Power_Down state.
4. Now system again goes into suspend without any UFS accesses before it.
ufshcd_system_suspend() again brings both link and device to active
state and then puts the device in Power_Down state and link if OFF
state. But it's unnecessary to bring the link & device in active state
as both link and device are already in desired low power states. This
change fixes this issue by adding proper state checks in
ufshcd_system_suspend().
Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit f37e9f8cf8bc681250880f8c1372fb882c9379b8
Author: Yaniv Gardi <ygardi@codeaurora.org>
Date: Wed Nov 23 16:32:49 2016 -0800
scsi: ufs: fix condition in which DME command failure msg is printed out
The condition in which error message is printed out was incorrect and
resulted error message only if retries exhausted.
But retries happens only if DME command is a peer command, and thus
DME commands which are not peer commands and fail are not printed out.
This change fixes this issue.
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit fb7b45f0462f144e1924a357995552f24f0c9d0c
Author: Dolev Raviv <draviv@codeaurora.org>
Date: Wed Nov 23 16:32:32 2016 -0800
scsi: ufs: handle errors from PHY_ADAPTER_ERROR register
The PHY_ADAPTER_ERROR status register indicates PHY lane errors
reported by the M-PHY layer. In some occasions the controller
can recover from such errors. When the error is not recoverable,
a stuck DB error will occur. Since the stuck DB error is spotted
separately, no action other than clearing the register is necessary.
Signed-off-by: Dolev Raviv <draviv@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit 7caf489b99a42a9017ef3d733912aea8794677e7
Author: subhashj@codeaurora.org <subhashj@codeaurora.org>
Date: Wed Nov 23 16:32:20 2016 -0800
scsi: ufs: issue link starup 2 times if device isn't active
If we issue the link startup to the device while its UniPro state is
LinkDown (and device state is sleep/power-down) then link startup
will not move the device state to Active. Device will only move to
active state if the link starup is issued when its UniPro state is
LinkUp. So in this case, we would have to issue the link startup 2
times to make sure that device moves to active state.
Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit c6a6db439868c7ba5cc90d4c461d9697ec731fa1
Author: subhashj@codeaurora.org <subhashj@codeaurora.org>
Date: Wed Nov 23 16:32:08 2016 -0800
scsi: ufs: ensure that host pa_tactivate is higher than device
Some UFS devices require host PA_TACTIVATE to be higher than
device PA_TACTIVATE otherwise it may get stuck during hibern8 sequence.
This change allows this by using quirk.
Reviewed-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit 10fe5888a40e6afbf1f3166c212c685624cae26b
Author: subhashj@codeaurora.org <subhashj@codeaurora.org>
Date: Wed Nov 23 16:31:52 2016 -0800
scsi: ufs: increase the scsi query response timeout
It is found thats UFS device may take longer than 30ms to respond to
query requests and in this case we might run into following scenario:
1. UFS host SW sends a query request to UFS device to read an attribute
value. SW uses tag #31 for this purpose.
2. UFS host SW waits for 30ms to get the query response (and doorbell
to be cleared by UFS host HW).
3. UFS device doesn't respond back within 30ms hence UFS host SW times
out waiting for the query response.
4. UFS host SW clears the tag#31 from UTRLCLR register.
5. UFS host SW waits until UFS host HW to clear tag#31 from the doorbell
register.
6. UFS host SW retries the same query request on same tag#31 (sends a query
request to device to read an attribute value).
7. UFS host HW gets the query response from the device but this was
intended as a query response for the 1st query request sent (step-1).
8. Now UFS device sends another query response to host (for query request
sent @step-6).
Now there are 2 issues that could happen with above scenario:
1. UFS device should have actually responded back with only one query
response but it is found that device may respond back with 2 query
responses.
2. If UFS device responds back with 2 resposes on same tag, host HW/SW
behaviour isn't predictable.
To avoid running into above scenario, we would basically allow device
to take longer (upto 1.5 seconds) for query response.
Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit bde44bb665d049468b6a1a2fa7d666434de4f83f
Author: subhashj@codeaurora.org <subhashj@codeaurora.org>
Date: Wed Nov 23 16:31:41 2016 -0800
scsi: ufs: fix failure to read the string descriptor
While reading variable size descriptors (like string descriptor), some UFS
devices may report the "LENGTH" (field in "Transaction Specific fields" of
Query Response UPIU) same as what was requested in Query Request UPIU
instead of reporting the actual size of the variable size descriptor.
Although it's safe to ignore the "LENGTH" field for variable size
descriptors as we can always derive the length of the descriptor from
the descriptor header fields. Hence this change impose the length match
check only for fixed size descriptors (for which we always request the
correct size as part of Query Request UPIU).
Reviewed-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit 24d6243204633be4b710754f279b3ca57c69ceec
Author: Yaniv Gardi <ygardi@codeaurora.org>
Date: Wed Nov 23 16:31:30 2016 -0800
scsi: ufs: update device descriptor maximum size
According to JESD220B - UFS v2.0, the maximum size of device descriptor
has changed from 0x1F to 0x40. This patch updates the maximum size of
this descriptor.
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit 4b761b580150b081e6829885afd3d540b746ccf0
Author: Yaniv Gardi <ygardi@codeaurora.org>
Date: Wed Nov 23 16:31:18 2016 -0800
scsi: ufs: add index details to query error messages
When sending query to the device, the index of the failure
is additional useful information that should be printed out as it
might specify the logical unit (LU) where the error occurred.
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit 61e073590b82a539654626ecae91b8fab11db3f3
Author: Dolev Raviv <draviv@codeaurora.org>
Date: Wed Nov 23 16:30:49 2016 -0800
scsi: ufs: add queries retry mechanism
Some of the queries might fail during init. To avoid
system failure, we add retry mechanism to issue queries
several times.
Signed-off-by: Dolev Raviv <draviv@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit 95d3af6bd18f381b5b1c62f117ce7f152a5db3ea
Author: Yazen Ghannam <Yazen.Ghannam@amd.com>
Date: Thu Nov 17 17:57:43 2016 -0500
EDAC, amd64: Autoload amd64_edac_mod on Fam17h systems
Add Fam17h to the list of families to autoload amd64_edac_mod.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1479423463-8536-18-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
commit 713ad54675fdfd7358dbcae21ab4788a014c6e23
Author: Yazen Ghannam <Yazen.Ghannam@amd.com>
Date: Mon Nov 28 12:59:53 2016 -0600
EDAC, amd64: Define and register UMC error decode function
How we need to decode UMC errors is different from how we decode bus
errors, so let's define a new function for this. We also need a way to
determine the UMC channel since we're not guaranteed that there is a
fixed relation between channel and MCA bank.
Signed-off-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: Aravind Gopalakrishnan <aravindksg.lkml@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1480359593-80369-1-git-send-email-Yazen.Ghannam@amd.com
[ Fold in decode_synd_reg(), simplify. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
commit d27f3a348e3677b7d5ee6954ebafce679b011164
Author: Yazen Ghannam <Yaz…
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jun 28, 2018
Add the following verifier tests to cover the cgroup storage functionality: 1) valid access to the cgroup storage 2) invalid access: use regular hashmap instead of cgroup storage map 3) invalid access: use invalid map fd 4) invalid access: try access memory after the cgroup storage 5) invalid access: try access memory before the cgroup storage 6) invalid access: call get_local_storage() with non-zero flags For tests 2)-6) check returned error strings. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK #1/u DIV32 by 0, zero check 1 OK ... torvalds#280/p valid cgroup storage access OK torvalds#281/p invalid cgroup storage access 1 OK torvalds#282/p invalid cgroup storage access 2 OK torvalds#283/p invalid per-cgroup storage access 3 OK torvalds#284/p invalid cgroup storage access 4 OK torvalds#285/p invalid cgroup storage access 5 OK ... torvalds#649/p pass modified ctx pointer to helper, 2 OK torvalds#650/p pass modified ctx pointer to helper, 3 OK Summary: 901 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jun 28, 2018
Add the following verifier tests to cover the cgroup storage functionality: 1) valid access to the cgroup storage 2) invalid access: use regular hashmap instead of cgroup storage map 3) invalid access: use invalid map fd 4) invalid access: try access memory after the cgroup storage 5) invalid access: try access memory before the cgroup storage 6) invalid access: call get_local_storage() with non-zero flags For tests 2)-6) check returned error strings. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK #1/u DIV32 by 0, zero check 1 OK ... torvalds#280/p valid cgroup storage access OK torvalds#281/p invalid cgroup storage access 1 OK torvalds#282/p invalid cgroup storage access 2 OK torvalds#283/p invalid per-cgroup storage access 3 OK torvalds#284/p invalid cgroup storage access 4 OK torvalds#285/p invalid cgroup storage access 5 OK ... torvalds#649/p pass modified ctx pointer to helper, 2 OK torvalds#650/p pass modified ctx pointer to helper, 3 OK Summary: 901 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jul 5, 2018
Add the following verifier tests to cover the cgroup storage functionality: 1) valid access to the cgroup storage 2) invalid access: use regular hashmap instead of cgroup storage map 3) invalid access: use invalid map fd 4) invalid access: try access memory after the cgroup storage 5) invalid access: try access memory before the cgroup storage 6) invalid access: call get_local_storage() with non-zero flags For tests 2)-6) check returned error strings. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK #1/u DIV32 by 0, zero check 1 OK ... torvalds#280/p valid cgroup storage access OK torvalds#281/p invalid cgroup storage access 1 OK torvalds#282/p invalid cgroup storage access 2 OK torvalds#283/p invalid per-cgroup storage access 3 OK torvalds#284/p invalid cgroup storage access 4 OK torvalds#285/p invalid cgroup storage access 5 OK ... torvalds#649/p pass modified ctx pointer to helper, 2 OK torvalds#650/p pass modified ctx pointer to helper, 3 OK Summary: 901 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Aug 7, 2018
Add the following verifier tests to cover the cgroup storage functionality: 1) valid access to the cgroup storage 2) invalid access: use regular hashmap instead of cgroup storage map 3) invalid access: use invalid map fd 4) invalid access: try access memory after the cgroup storage 5) invalid access: try access memory before the cgroup storage 6) invalid access: call get_local_storage() with non-zero flags For tests 2)-6) check returned error strings. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK #1/u DIV32 by 0, zero check 1 OK ... torvalds#280/p valid cgroup storage access OK torvalds#281/p invalid cgroup storage access 1 OK torvalds#282/p invalid cgroup storage access 2 OK torvalds#283/p invalid per-cgroup storage access 3 OK torvalds#284/p invalid cgroup storage access 4 OK torvalds#285/p invalid cgroup storage access 5 OK ... torvalds#649/p pass modified ctx pointer to helper, 2 OK torvalds#650/p pass modified ctx pointer to helper, 3 OK Summary: 901 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Mar 15, 2021
This commit fixes the following checkpatch.pl errors:
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#285: FILE: ./hal/odm.c:285:
+void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#287: FILE: ./hal/odm.c:287:
+void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#289: FILE: ./hal/odm.c:289:
+void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#291: FILE: ./hal/odm.c:291:
+void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#305: FILE: ./hal/odm.c:305:
+void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#309: FILE: ./hal/odm.c:309:
+void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#311: FILE: ./hal/odm.c:311:
+void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#313: FILE: ./hal/odm.c:313:
+void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#315: FILE: ./hal/odm.c:315:
+void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#323: FILE: ./hal/odm.c:323:
+void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#325: FILE: ./hal/odm.c:325:
+void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#327: FILE: ./hal/odm.c:327:
+void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#330: FILE: ./hal/odm.c:330:
+void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#338: FILE: ./hal/odm.c:338:
+void odm_InitHybridAntDiv(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#341: FILE: ./hal/odm.c:341:
+ struct DM_ODM_T * pDM_Odm,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#349: FILE: ./hal/odm.c:349:
+void odm_SetRxIdleAnt(struct DM_ODM_T * pDM_Odm, u8 Ant, bool bDualPath);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#353: FILE: ./hal/odm.c:353:
+void odm_HwAntDiv(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#363: FILE: ./hal/odm.c:363:
+void ODM_DMInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#393: FILE: ./hal/odm.c:393:
+void ODM_DMWatchdog(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#420: FILE: ./hal/odm.c:420:
+ struct DIG_T * pDM_DigTable = &pDM_Odm->DM_DigTable;
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#448: FILE: ./hal/odm.c:448:
+void ODM_CmnInfoInit(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, u32 Value)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#560: FILE: ./hal/odm.c:560:
+void ODM_CmnInfoHook(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, void *pValue)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#689: FILE: ./hal/odm.c:689:
+ struct DM_ODM_T * pDM_Odm,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#717: FILE: ./hal/odm.c:717:
+void ODM_CmnInfoUpdate(struct DM_ODM_T * pDM_Odm, u32 CmnInfo, u64 Value)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#831: FILE: ./hal/odm.c:831:
+void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#841: FILE: ./hal/odm.c:841:
+void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#867: FILE: ./hal/odm.c:867:
+void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#888: FILE: ./hal/odm.c:888:
+void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#935: FILE: ./hal/odm.c:935:
+void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#937: FILE: ./hal/odm.c:937:
+ struct ODM_RATE_ADAPTIVE * pOdmRA = &pDM_Odm->RateAdaptive;
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#953: FILE: ./hal/odm.c:953:
+ struct DM_ODM_T * pDM_Odm,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#1083: FILE: ./hal/odm.c:1083:
+void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#1094: FILE: ./hal/odm.c:1094:
+void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1131: FILE: ./hal/odm.c:1131:
+ struct DM_ODM_T * pDM_Odm,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1137: FILE: ./hal/odm.c:1137:
+ struct ODM_RATE_ADAPTIVE * pRA = &pDM_Odm->RateAdaptive;
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1196: FILE: ./hal/odm.c:1196:
+void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1198: FILE: ./hal/odm.c:1198:
+ struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1204: FILE: ./hal/odm.c:1204:
+void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1217: FILE: ./hal/odm.c:1217:
+ struct DM_ODM_T * pDM_Odm = &(pHalData->odmpriv);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1234: FILE: ./hal/odm.c:1234:
+void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1243: FILE: ./hal/odm.c:1243:
+ struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1306: FILE: ./hal/odm.c:1306:
+static u8 getSwingIndex(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1330: FILE: ./hal/odm.c:1330:
+void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1374: FILE: ./hal/odm.c:1374:
+void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1398: FILE: ./hal/odm.c:1398:
+void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1400: FILE: ./hal/odm.c:1400:
+ struct SWAT_T * pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Mar 15, 2021
This commit fixes the following checkpatch.pl errors:
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#218: FILE: ./include/hal_com.h:218:
+ struct adapter * Adapter,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#230: FILE: ./include/hal_com.h:230:
+void rtw_init_hal_com_default_value(struct adapter * Adapter);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#282: FILE: ./include/hal_com.h:282:
+ void * pValue1,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#283: FILE: ./include/hal_com.h:283:
+ void * pValue2);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#285: FILE: ./include/hal_com.h:285:
+ struct adapter * Adapter,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#287: FILE: ./include/hal_com.h:287:
+ void * pValue1,
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Mar 16, 2021
This commit fixes the following checkpatch.pl errors:
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#285: FILE: ./hal/odm.c:285:
+void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#287: FILE: ./hal/odm.c:287:
+void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#289: FILE: ./hal/odm.c:289:
+void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#291: FILE: ./hal/odm.c:291:
+void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#305: FILE: ./hal/odm.c:305:
+void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#309: FILE: ./hal/odm.c:309:
+void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#311: FILE: ./hal/odm.c:311:
+void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#313: FILE: ./hal/odm.c:313:
+void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#315: FILE: ./hal/odm.c:315:
+void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#323: FILE: ./hal/odm.c:323:
+void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#325: FILE: ./hal/odm.c:325:
+void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#327: FILE: ./hal/odm.c:327:
+void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#330: FILE: ./hal/odm.c:330:
+void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#338: FILE: ./hal/odm.c:338:
+void odm_InitHybridAntDiv(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#341: FILE: ./hal/odm.c:341:
+ struct DM_ODM_T * pDM_Odm,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#349: FILE: ./hal/odm.c:349:
+void odm_SetRxIdleAnt(struct DM_ODM_T * pDM_Odm, u8 Ant, bool bDualPath);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#353: FILE: ./hal/odm.c:353:
+void odm_HwAntDiv(struct DM_ODM_T * pDM_Odm);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#363: FILE: ./hal/odm.c:363:
+void ODM_DMInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#393: FILE: ./hal/odm.c:393:
+void ODM_DMWatchdog(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#420: FILE: ./hal/odm.c:420:
+ struct DIG_T * pDM_DigTable = &pDM_Odm->DM_DigTable;
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#448: FILE: ./hal/odm.c:448:
+void ODM_CmnInfoInit(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, u32 Value)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#560: FILE: ./hal/odm.c:560:
+void ODM_CmnInfoHook(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, void *pValue)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#689: FILE: ./hal/odm.c:689:
+ struct DM_ODM_T * pDM_Odm,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#717: FILE: ./hal/odm.c:717:
+void ODM_CmnInfoUpdate(struct DM_ODM_T * pDM_Odm, u32 CmnInfo, u64 Value)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#831: FILE: ./hal/odm.c:831:
+void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#841: FILE: ./hal/odm.c:841:
+void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#867: FILE: ./hal/odm.c:867:
+void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#888: FILE: ./hal/odm.c:888:
+void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#935: FILE: ./hal/odm.c:935:
+void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#937: FILE: ./hal/odm.c:937:
+ struct ODM_RATE_ADAPTIVE * pOdmRA = &pDM_Odm->RateAdaptive;
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#953: FILE: ./hal/odm.c:953:
+ struct DM_ODM_T * pDM_Odm,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#1083: FILE: ./hal/odm.c:1083:
+void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#1094: FILE: ./hal/odm.c:1094:
+void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1131: FILE: ./hal/odm.c:1131:
+ struct DM_ODM_T * pDM_Odm,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1137: FILE: ./hal/odm.c:1137:
+ struct ODM_RATE_ADAPTIVE * pRA = &pDM_Odm->RateAdaptive;
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1196: FILE: ./hal/odm.c:1196:
+void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1198: FILE: ./hal/odm.c:1198:
+ struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1204: FILE: ./hal/odm.c:1204:
+void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1217: FILE: ./hal/odm.c:1217:
+ struct DM_ODM_T * pDM_Odm = &(pHalData->odmpriv);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1234: FILE: ./hal/odm.c:1234:
+void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1243: FILE: ./hal/odm.c:1243:
+ struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1306: FILE: ./hal/odm.c:1306:
+static u8 getSwingIndex(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1330: FILE: ./hal/odm.c:1330:
+void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1374: FILE: ./hal/odm.c:1374:
+void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1398: FILE: ./hal/odm.c:1398:
+void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm)
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
#1400: FILE: ./hal/odm.c:1400:
+ struct SWAT_T * pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
Link: https://lore.kernel.org/r/20210315170618.2566-21-marcocesati@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Mar 16, 2021
This commit fixes the following checkpatch.pl errors:
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#218: FILE: ./include/hal_com.h:218:
+ struct adapter * Adapter,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#230: FILE: ./include/hal_com.h:230:
+void rtw_init_hal_com_default_value(struct adapter * Adapter);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#282: FILE: ./include/hal_com.h:282:
+ void * pValue1,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#283: FILE: ./include/hal_com.h:283:
+ void * pValue2);
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#285: FILE: ./include/hal_com.h:285:
+ struct adapter * Adapter,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#287: FILE: ./include/hal_com.h:287:
+ void * pValue1,
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
Link: https://lore.kernel.org/r/20210315170618.2566-42-marcocesati@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
jonhunter
pushed a commit
to jonhunter/linux
that referenced
this pull request
Feb 2, 2022
WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter
pushed a commit
to jonhunter/linux
that referenced
this pull request
Feb 7, 2022
WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter
pushed a commit
to jonhunter/linux
that referenced
this pull request
Feb 8, 2022
WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter
pushed a commit
to jonhunter/linux
that referenced
this pull request
Feb 9, 2022
WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
staging-kernelci-org
pushed a commit
to kernelci/linux
that referenced
this pull request
Feb 11, 2022
WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter
pushed a commit
to jonhunter/linux
that referenced
this pull request
Feb 14, 2022
WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter
pushed a commit
to jonhunter/linux
that referenced
this pull request
Feb 15, 2022
WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
jonhunter
pushed a commit
to jonhunter/linux
that referenced
this pull request
Feb 16, 2022
WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Feb 24, 2022
WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: zhanglianjie <zhanglianjie@uniontech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Brown <broonie@kernel.org>
akiernan
pushed a commit
to zuma-array/linux
that referenced
this pull request
Nov 3, 2022
PD#151224: driver defect clean up: torvalds#227 torvalds#238~239 torvalds#249 torvalds#257~258 torvalds#285~287 torvalds#384 torvalds#466~467 torvalds#472~474 torvalds#585 torvalds#655 torvalds#659~660 Change-Id: I241d863318a8754c0e7c5fa1155247d99a21eb9e Signed-off-by: KeLe Bai <kele.bai@amlogic.com>
akiernan
pushed a commit
to zuma-array/linux
that referenced
this pull request
Nov 4, 2022
PD#151224: driver defect clean up: torvalds#227 torvalds#238~239 torvalds#249 torvalds#257~258 torvalds#285~287 torvalds#384 torvalds#466~467 torvalds#472~474 torvalds#585 torvalds#655 torvalds#659~660 Change-Id: I241d863318a8754c0e7c5fa1155247d99a21eb9e Signed-off-by: KeLe Bai <kele.bai@amlogic.com>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
May 13, 2023
…h-fixes ERROR: Macros with complex values should be enclosed in parentheses #58: FILE: include/linux/maple_tree.h:544: +#define mas_contiguous(__mas, __entry, __max) \ + while (((__entry) = mas_find_range((__mas), (__max))) != NULL) WARNING: suspect code indent for conditional statements (8, 12) torvalds#285: FILE: lib/maple_tree.c:6136: + if (mas_find_setup(mas, max, &entry)) + return entry; WARNING: Statements should start on a tabstop torvalds#286: FILE: lib/maple_tree.c:6137: + return entry; total: 1 errors, 2 warnings, 284 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/maple_tree-add-mas_next_range-and-mas_find_range-interfaces.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
May 16, 2023
…h-fixes ERROR: Macros with complex values should be enclosed in parentheses #58: FILE: include/linux/maple_tree.h:544: +#define mas_contiguous(__mas, __entry, __max) \ + while (((__entry) = mas_find_range((__mas), (__max))) != NULL) WARNING: suspect code indent for conditional statements (8, 12) torvalds#285: FILE: lib/maple_tree.c:6136: + if (mas_find_setup(mas, max, &entry)) + return entry; WARNING: Statements should start on a tabstop torvalds#286: FILE: lib/maple_tree.c:6137: + return entry; total: 1 errors, 2 warnings, 284 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/maple_tree-add-mas_next_range-and-mas_find_range-interfaces.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
May 17, 2023
…h-fixes ERROR: Macros with complex values should be enclosed in parentheses #58: FILE: include/linux/maple_tree.h:544: +#define mas_contiguous(__mas, __entry, __max) \ + while (((__entry) = mas_find_range((__mas), (__max))) != NULL) WARNING: suspect code indent for conditional statements (8, 12) torvalds#285: FILE: lib/maple_tree.c:6136: + if (mas_find_setup(mas, max, &entry)) + return entry; WARNING: Statements should start on a tabstop torvalds#286: FILE: lib/maple_tree.c:6137: + return entry; total: 1 errors, 2 warnings, 284 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/maple_tree-add-mas_next_range-and-mas_find_range-interfaces.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
May 17, 2023
…h-fixes ERROR: Macros with complex values should be enclosed in parentheses #58: FILE: include/linux/maple_tree.h:544: +#define mas_contiguous(__mas, __entry, __max) \ + while (((__entry) = mas_find_range((__mas), (__max))) != NULL) WARNING: suspect code indent for conditional statements (8, 12) torvalds#285: FILE: lib/maple_tree.c:6136: + if (mas_find_setup(mas, max, &entry)) + return entry; WARNING: Statements should start on a tabstop torvalds#286: FILE: lib/maple_tree.c:6137: + return entry; total: 1 errors, 2 warnings, 284 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/maple_tree-add-mas_next_range-and-mas_find_range-interfaces.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
May 18, 2023
…h-fixes ERROR: Macros with complex values should be enclosed in parentheses #58: FILE: include/linux/maple_tree.h:544: +#define mas_contiguous(__mas, __entry, __max) \ + while (((__entry) = mas_find_range((__mas), (__max))) != NULL) WARNING: suspect code indent for conditional statements (8, 12) torvalds#285: FILE: lib/maple_tree.c:6136: + if (mas_find_setup(mas, max, &entry)) + return entry; WARNING: Statements should start on a tabstop torvalds#286: FILE: lib/maple_tree.c:6137: + return entry; total: 1 errors, 2 warnings, 284 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/maple_tree-add-mas_next_range-and-mas_find_range-interfaces.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.